Mitsui Seiki HU63-5X: For High Production Machining

MODEL HU63-5X WITH FANUC 30i

MITSUI SEIKI High Production Machining Center Model HU63-5X with 630 mm square pallets. Numerically controlled with all standard equipment and features including: Automatic Tool Changer, Automatic Pallet Changer, and high production capability for drilling, boring, tapping and reaming. Integrated circuit logic, closed loop, complete electrical equipment for operation on: 3-phases, 50/60Hz, 200/220 Volts AC.

MACHINE SPECIFICATIONS

Working Capacity

Table longitudinal stroke (X axis):	900 mm (35.43")
Spindle head vertical stroke (Y axis):	900 mm (35.43")
Column longitudinal stroke (Z axis):	900 mm (35.43")
Distance from table center to spindle nose (When A axis is horizontal) (When A axis is horizontal):	150 - 1050 mm (5.9" - 41.34")
Distance from table surface to spindle nose (When A axis is vertical): (When A axis is vertical):	150 - 1050 mm (5.9" - 41.34")
Distance from table surface to spindle nose (When A axis is horizontal): (When A axis is horizontal):	.-100 ~ 800 mm (-3.9" - 31.5")
Distance from table center to spindle axis (When A axis is vertical): (When A axis is vertical):	-450 ~ 450 mm (-17.7" ~ 17.7")

Interference of whole machine cover with work piece on pallet

Axis Traverse Rates - Rapid Traverse Rates

Cutting Feed Rates

Minimum Resolution

Electrical Power Required

Air Service Required

Machine Dimensions (Standard machine, includes 2 APC & chip conveyor)

Floor space (Includes front APC and maintenance space

Numerical Control Equipment

In machine:	950 mm dia: (37.40" Ø)
In two station automatic pallet changer (2 APC):	950 mm Ø (37.40" Ø)

X axis:	12,000 mm / min (473 ipm)
Y & Z axes:	24,000 mm / min (975 ipm)
B axis:	3,600º / min 10 rpm
A axis:	2,160º / min

X, Y and Z axes:	0.1 - 10,000 mm/min (0.004 - 394 ipm)
A axis:	0.1 ~ 2,160º / min
B axis:	0.1 ~ 3,600º/min

X, Y and Z axes:	0.001 mm
B axis:	0.001º
A axis:	0.001º

Power Required:	AC 200/220V, 3 phase 50/60HZ, 50 KVA
Power Required for Optional 12,000 and 20,000 RPM Spindles:	75 KVA

Air Required:	0.5 - 0.7 MPa, 1.0 m3/min (Dry and clean air) 700 N liter for standard spindle (70~100 PSI @24 cfm)
Air Required for Optional 12,000 and 20,000 RPM Spindles:	1.0 m3/min (Dry and clean air) 1,200 N liter (70~100 PSI @ 42 cfm)

Length:	6,000mm (237")
Width:	4,900mm (193")
Height:	3,450mm (136")
Height of table surface from floor:	1,450mm (57.08")
With optional T-slot pallets:	(1,480mm (58.26")
Machine Weight:	26,000kgs (57,200 lbs)

Length:	10m (33 ft.)
Width:	8.5m (28 ft.)