2011 USED “BROTHER” VERTICAL MACHINING CENTER WITH AUTO PALLET CHANGER MODEL: TC-32BN QT S/N 121740

With Brother CNC-B00 CNC Control

1

SPECIFICATIONS:

X-Axis Travel: 21.7"   550 mm
Y-Axis Travel: 15.7"  400 mm
Z-Axis Travel: 16.3"  415 mm
Table Size: 23.6" x 16.77" 600x425mm
Spindle Taper: BT 30
Spindle Drive: 13.41 HP /9.8 HP
No. of tool pocket at ATC:  40 Tools
Rapid Traverse: 2,755 IPM
Cutting Feed Rate: 787 IPM
Distance Table Top to Spindle Nose: 25.4"
Maximum Loading Capacity: 330 Lbs. Per Side
Spindle Speeds: 16,000 RPM Speed
Tapping Max Speed: 8,000 RPM
Approximate Floor Space: 74.4" x 144.4"
Approximate Machine Height: 92.9"
Approximate Machine Weight: 9,920 Lbs.

Equipped with:

  • Automatic Pallet Changer, 2-pallets rotary type.
  • “Yukiwa “ 6.7” Rotary Table & Tail support 2-SETS
  • 40-Station Automatic Tool Changer
  • Coolant through spindle with “ChipBlaste” 1,000 psi high pressure pump
  • “LNS” Chip conveyor
  • TOOL PROBE
  • MEASURING PROBE

Operation (Machining ) time: 6,594 Hours ONLY.

Replacement cost: $235,000.00

2

40 tools ATC.  BT-30

3

Tool probe

Yukiwa Japan Rotary table

4
5

Inside - Pallet Changer

*Vise, Fixtures and Tool holders are not included

OPERATION (MACHINING) TIME: 6,594 HOURS ONLY

6
7
8
9

TERMS & CONDITIONS

TERMS and PAYMENT :

Unless otherwise noted on the front page hereof, payment shall be 10% as a down payment with order, balance 90% shall be made by the Purchaser to CALTEC no later than 48 hours prior to the machine removal. Payment shall be by bank wire transfer, certified or cashier’s check or Cash.

CONDITIONS :

Item(s) are sold “As Is, Where Is” unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice.

All agreements and/or contracts made by sales person are subject to approval.

SPECIFICATIONS & YEARS.

CALTEC provided machine specifications, equipment list and manufactured year of machines on the front pages which are CALTEC’s best knowledge..It is the purchaser’s  responsibility to inspect and confirm them prior to purchase.

CALTEC reserve the right to correct typographical errors on CALTEC’s documents.  

EQUIPMENT SAFETY :

It is the buyers / user’s responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and adequately safeguard the equipment to conform to all Federal, state and Local Government Safety Standards and all Industrial Standards.

INDEMNIFICATION :

Buyer/User agrees to indemnify and hold harmless the Seller and Salesperson(s) from any and all claims or liabilities caused by or arising from the equipment on the face hereof.

It is the Purchasers responsibility to verify the machine(s) condition and specifications and to pay any and all applicable Taxes.