Learn About the Features of Our Fryer 3–5 Axis
5X Series 5-Axis VMC
5X Series
5-AXIS VERTICAL MACHINING CENTER
| MODEL | ||||
|---|---|---|---|---|
| X Travel | 60" | 100" | 120" | 160" |
| Y Travel | 30" | 35" | 50" | 50" |
| Z Travel | 35" | 34" | 40" | 40" |
| A Travel | +/- 95° | +/- 95° | +/- 105° | |
| C Travel | +/- 200° | |||
| Table Load | 5,000 lbs. | 5,000 lbs. | 7,500 lbs. | 8,500 lbs. |
| Table Size | 24" x 67" | 30" x 112" | 40" x 126" | 40" x 165" |
| Way Type | Linear | Box Ways | Box Ways | |
| Motor HP | 35 HP | 35 HP | 55 HP | |
| Spindle Speed | 200 - 18,000 RPM | 200 - 18,000 RPM | 200 - 15,000 RPM | |
| Spindle Torque | 40 ft/lbs @ 1000 rpm | 200 - 15,000 RPM | 90 ft/lbs @ 2000 rpm | |
| Spindle /Taper | HSK- 63A | HSK-A63 | HSK-A63 | |
| ATC (Op.) Tools | 40 (60) | 40 (60) | 40 (60) | |
5-AXIS CONTROL :FRYER-SIEMENS 840D, FANUC 31i-B5
5X Series
5-AXIS VERTICAL MACHINING CENTER
| MODEL | ||||
|---|---|---|---|---|
| X Travel | 60" | 100" | 120" | 160" |
| Y Travel | 30" | 35" | 50" | 50" |
| Z Travel | 35" | 34" | 40" | 40" |
| A Travel | +/- 95° | +/- 95° | +/- 105° | |
| C Travel | +/- 200° | |||
| Table Load | 5,000 lbs. | 5,000 lbs. | 7,500 lbs. | 8,500 lbs. |
| Table Size | 24" x 67" | 30" x 112" | 40" x 126" | 40" x 165" |
| Way Type | Linear | Box Ways | Box Ways | |
| Motor HP | 35 HP | 35 HP | 55 HP | |
| Spindle Speed | 200 - 18,000 RPM | 200 - 18,000 RPM | 200 - 15,000 RPM | |
| Spindle Torque | 40 ft/lbs @ 1000 rpm | 200 - 15,000 RPM | 90 ft/lbs @ 2000 rpm | |
| Spindle /Taper | HSK- 63A | HSK-A63 | HSK-A63 | |
| ATC (Op.) Tools | 40 (60) | 40 (60) | 40 (60) | |
5-AXIS CONTROL :FRYER-SIEMENS 840D, FANUC 31i-B5
XP Series
MC Series
VB Series
CM Series
VB Series,
XTRA LARGE
VERTICAL HEAVY DUTY EXTRA LARGE MACHINING CENTER
MODEL: VB-160
| MODEL | |||
|---|---|---|---|
| TRAVEL X-Y-Z | 100 x 40(35) x 34” | 120 x 40(50) x 40” | 160” x 40(50) x 40” |
| TABLE SIZE | 112” X 30” | 120” X 40” | 160” X 40” |
| TABLE LOAD CAPA | 5000 Lbs. | 6,500 Lbs. | 6,500 Lbs. |
| SPINDLE MOTOR | 30 HP (40) | 30 HP (40) | 30 HP (40) |
| SPINDLE SPEED | 8,000rpm (10,000) | 8,000rpm (10,000) | 8,000rpm (10,000) |
| SPINDLE TAPER | CT-50 (CT-40) | CT-50 (CT-40) | CT-50 (CT-40) |
| ATC | 20, 24, 40 Tools | 20, 24, 40 Tools | 20, 24, 40 Tools |
Designed as heavy duty machining center for extra large work pieces with following features.
- Extra wide box ways to support heavy duty machining plus absoling cutting viblation
- Valaety of spindle (50 & 40 taper), spindle speed (6K, 8K,10K, 12K & 15K) and driving system
(30, 40 HP, Gear drive) to fit your machining requirement - 2-range gear drive provide 800 Ft/Lbs with 40 hp motor for machining tough material (Op)
- FRYER-SIEMENS Control or FANUC Control
- Full enclosure, Chip Conveyors
X: 120", 160"
Y: 40", 50"
Z: 40"
TC-V Series
