2017 LIKE NEW(Less than 50 hrs used) Hydro-Jet Eco 0515 SL Waterjet Cutting System

with BFT high-pressure pump 15 HP 50,000 psi

1

NEVER USED, BRAND NEW !!

WORKING AREA:

Travel X-Axis: 59" Travel
Y-Axis: 20" Travel
Z-Axis: 3"
Abrasive Cutting: Yes
Pure-Water Cutting: Yes
Abrasive Container: 165lbs

Drive Type:
X-Axis: Preloaded Ball Screw
Y-Axis: Preloaded Ball Screw
Z-Axis: Hand Wheel
Feed: Max Feed Rate: 156 "/Min

ACCURACIES:

Positioning Accuracy X-Axis: (+/-0.004”/12”)
Positioning Accuracy Y-Axis: (+/-0.004”/12”)
Repeatability X-Axis: (+/-0.002”/12”)
Repeatability Y-Axis: (+/-0.002”/12”)
Weights: Weight (without high pressure pump): 6,600lbs

STANDARD EQUIPMENT:

CNC control with 17” TFT monitor, grid nesting, electronic hand-wheel, control panel, BFT high-pressure pump 15 HP, 50,000 PSI, abrasive cutter head, abrasives tank (75 kg), sand metering system, 3-chamber settling tank, operating manual and programming instructions.

2
3
4

Abrasive cutter head, abrasives tank (75 kg), sand metering system, 3-chamber settling tank, with operating manual and programming instructions

Robust system with small footprint and high operator comfort - State-of-the-art GPlus Cut control - Completely equipped for Abrasive & Pure-Water Cutting - Axes are driven via preloaded ball screws - Flying Bridge Construction - Quick programming on an integrated PC control with graphic user interface; software package included - Compact machine for easy transportation and setup;  guide machine, stainless steel tank with settling basin, and control cabinet are mounted on a granite machine frame

High quality, high pressure BFT pump - made in Austria

Pressure is generated with an axial piston pump, precisely regulated by the standard proportional valve.  The high-quality reliable pressure intensifier and the large pulsation damper with a storage volume of 2.49 l ensures even pressure for a flawless cut.  Equipped as standard with an oil/air cooler, ECOTRON® saves not only money but also spares the environment.  Dual filter unit prevents damage to intensifier.

- Touch screen for easy operation - Control with the machine controller of the waterjet cutting system easily - Many languages available - Operational states visible - Operating data memory

Control

The GPlus 450Cut features a customized user interface that was specifically designed to meet the special requirements for 2-D cutting.

  • Easy, user-oriented operation allows quick creation of programs
  • Geometry imports from DXF and DIN/ISO program files
  • Faulty geometries can be repaired and edited with the integrated DXF Analyzer
  • 50 standard macros simplify the creation of a wide variety of geometries
  • Instant display of all starting cut changes in the drawing with simulation option
  • Optimum material utilization via grid nesting function with critical features like turning, mirroring, and manual sorting
  • Material database with plate management function - for the management of all customer-specific data on machined materials, including cutting technology data, and dimensions
  • Optimum contour approach made possible by a multitude of definable starting cut conditions differentiating between circular and non-circular inside and outside contours
  • Zoom feature - enlarges the part view and all starting cuts
  • User-friendly HMI allow modification of any cutting parameters during cutting, plus easy operation including all required service messages
  • Cutting and marking in one program
  • After interruption of a work process, machining may be resumed at the last position
  • Calculation assurance: machining time and material consumption can be quickly determine dusing the cut simulation
  • Online Help: we provide prompt and proficient online support
  • Industrial PC-based CNC
  • Block processing time: 450 NC blocks per sec
  • 40 GB hard drive storage
  • 2.0 GHz Intel Celeron processor
  • 10/100 MBit Ethernet interface (to load NC programs from a network)
  • USB port for data transfers.

Advantages: - No thermal stresses, hardening, or tensions on the part - No dust, smoke or toxic fumes - Small kerf width and very clean cut edges - Virtually burr-free cuts = no rework necessary - Direct plunge-cut at any position

Working Area: Travel X-Axis:  59" Travel Y-Axis:  20" Travel Z-Axis:  3" Abrasive Cutting:  Yes Pure-Water Cutting:  Yes Abrasive Container:  165lbs

The machine is used only less than 50 hours, like demo machine.

FOB: ORANGE COUNTY, CA

TERMS & CONDITIONS

TERMS and PAYMENT :

Unless otherwise noted on the front page hereof, payment shall be 10% as a down payment with order, balance 90% shall be made by the Purchaser to CALTEC no later than 48 hours prior to the machine removal. Payment shall be by bank wire transfer, certified or cashier’s check or Cash.

CONDITIONS :

Item(s) are sold “As Is, Where Is” unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice.

All agreements and/or contracts made by sales person are subject to approval.

SPECIFICATIONS & YEARS.

CALTEC provided machine specifications, equipment list and manufactured year of machines on the front pages which are CALTEC’s best knowledge..It is the purchaser’s  responsibility to inspect and confirm them prior to purchase.

CALTEC reserve the right to correct typographical errors on CALTEC’s documents.  

EQUIPMENT SAFETY :

It is the buyers / user’s responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and adequately safeguard the equipment to conform to all Federal, state and Local Government Safety Standards and all Industrial Standards.

INDEMNIFICATION :

Buyer/User agrees to indemnify and hold harmless the Seller and Salesperson(s) from any and all claims or liabilities caused by or arising from the equipment on the face hereof.

It is the Purchasers responsibility to verify the machine(s) condition and specifications and to pay any and all applicable Taxes.