HB-110 Series CNC Table Type

Horizontal Boring and Milling Machine

Nomura Table Type

 
  • Japan’s most oldest and most experienced manufacturer puts the complete HBM package together.
  • All the major components are cast from the highest grade of iron, designed as a one-piece bed with the rational-rib approach and overly heavy walls and wide box ways, hardened and then hand-scraped or machined to perfection.
  • The Nomura spindle goes through a six month, twenty-step process. In the end, it has the ideal hardness and finish, and is 300% straighter than even the Japanese Industrial Standards ( JIS ) allow. 
  • The Fanuc controller and oversized servo motors, ballscrews, bearings, gears, and all the internal components meet the highest levels of the JIS quality requirements.
  • A full array of optional accessories such as enlarged ATC magazines, facing and contouring heads, secondary rotary tables, and Probes, etc. are available.

Features

Nomura_table Nomura_magazine
Accuracy Table 40 Tool Magazine Hand Scraping
nomura_spindle Nomura_conveyor Nomura_controller
Nose Type Spindle Built-in Chip Conveyor Operator-Friendly Controller


  • Software and chip conveyor provide enhanced operability.
  • Compact design.
  • A large diameter ball screw and grease lubricated spindle bearing achieve high precision.
  • Higher speeds and shorter processing times.
  4" Rotary Table Type 4" Rotary Table Type 5" Rotary Table Type 5" Plain Table Type
Model HBA-110T-R2 HBA-110T-R3 HBA135P-R5 HBA-135P-P5
Spindle        
Spindle Diameter 4.33" 4.3" 5.31" 5.31"
Spindle Speed 3,000 rpm 4,000 rpm 3,000 rpm 3,000 rpm
Spindle Taper 7/24 Taper No 50 7/24 Taper No 50 7/24 Taper No 50 7/24 Taper No 50
Max. Spindle Torque 790 ft-lbs 2,615 ft-lbs 2,930 ft-lbs 2,930 ft-lbs
Max. Spindle Thrust 3,305 lbs 4,400 lbs 6,609 lbs 6,609 lbs
Travel        
X Axis (table cross traverse) 51.2" (option 59.1") 78.8" 118.1" 118.1"
Y Axis (headstock vertical travel) 45.3" 60" 90.5" 90.5"
Z Axis (column longitudinal travel) 34.4" 55.1" 55.1" (Option: 95") 55.1" (Option: 95")
W. Axis (spindle travel) 15.7" 19.7" 27.5" 27.5"
Table        
Table Size 45" x 45" 55.1" x 63" 70.8" x 78.7" 59" x 118.1"
Max. Load on Table (uniformly distributed load) 6,600 lbs 15,400 lbs 33,000 lbs 55,116 lbs
Min. Command Indexing Angles on Table (B Axis) 0.001 deg. 0.001 deg. 0.001 deg. N/A
Feed        
Rapid Traverse of X.Y and Z Axes 472.4"/min  472.4"/min 393.7"/min 393.7"/min
Rapid Traverse of W Axis 236.2"/min 196.9"/min 236.2"/min 236.2"/min
Feed Rate 0.04"/min~236"/min 0.04"/min~275.6"/min 0.004"/min~196.8"/min 0.004"/min~196.8"/min
Table Rotation Speed 540 deg/min 540 deg/min 500 deg/min 500 deg/min
Motor        
Spindle Drive Motor 30 HP 30 HP 60 HP 60 HP
Machine Size        
Machine Height 139" 154" 182" 182"
Required Floor Space 145" x 223" 211" x 174" 265" x 285" 308" x 270"

About Caltec

Since 1985, CALTEC has shared a commitment with high quality machine tool buiders from around the world who develop customer driven solutions focused on productivity, accuracy, and surface finish utilizing leading edge technology.

Terms of Use
Privacy Policy
FAQ
Sitemap

CNC MACHINE SERVICE / REPAIR – INCLUDING MACHINES NOT SOLD BY US

CALTEC's talented CNC Service Technicians in our Advanced Engineering Department, have 40+ years experience. CALTEC Machinery doctors are available to support any CNC or manual machine our customers currently own, including machines not purchased through CALTEC Machinery.

Get in Touch

  • Phone:
    (310) 605 5221
  • Fax:
    (310) 605 5210
  • Email: sales@caltecusa.com

  • info@caltecusa.com
  • Address:
    1808 W. Mahalo Place
    Rancho Dominguez, CA 90220