MODEL VERTEX 75X II WITH FANUC 31i


Vertex 75X II

MITSUI SEIKI High Production Machining Center Model Vertex 75X II, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Integrated circuit logic, closed loop, complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC.

MACHINE SPECIFICATIONS

Working Capacity
Table longitudinal travel (X axis) 750 mm (29.5")
Table cross stroke (Y axis) 800 mm (31.5")
Spindle head vertical stroke (Z axis) 700 mm (27.5")
Dist. From Spindle Centerline to Table Center (when A axis is at 0º) 150mm to 850 mm (5.9"-33.46")
A axis (tilt table) +15 ~ -105 degrees
C axis (rotary table) 360º (0.001º)
Table (Pallet)
Working surface 500mm Ø (19.68" Ø)
Max permissible load on pallet (Horizontally) 500 kg . (1,100 lb.)
Table surface Tapped hole M12-P1.75 (28 pl)
Height from floor to table top 925mm (36.41")
Axis Traverse Rates
Rapid traverse rates
X, Y and axes 48,000 mm/min (1,900 ipm)
A axis (tilt) 20 RPM
C axis (rotary) 40 RPM
Cutting feed rates
X, Y and Z axes 0.1~20,000 mm/min
(0.004 ~ 787 IPM)
A axis (tilt) 0 ~ 15 RPM
C axis (rotary) 0 ~ 30 RPM
Minimum Resolution
X, Y and Z axes 0.0001 mm (0.0000039")
A and C axes 0.0001º
X, Y & Z axes Linear scale feedback
(precision glass scale standard)
A and C axes Precision rotary encoder(shaft mounted)
Electrical Power Required
Power Required AC 200/220V, 3 phase 50/60HZ, 60 KVA
Air Service Required
Air Required 0.4 MPa, 1.0 m3/min (Dry and clean air)
1200 N liter for standard spindle
(70~100 PSI @ 60 cfm) 
Machine Dimensions
(Standard machine, includes chip conveyor)
Length 3,740 mm (147.2")
Width 2,250 mm (88.6")
Height 3,610 mm (142.1")
Machine Weight 12,500 kg. (27,500 lbs)
Floor Space
Length 4.3 m (14.1' )
Width 3.3 m (10.8' )
Numerical Control Equipment
CNC Control FANUC 31i

About Caltec

Since 1985, CALTEC has shared a commitment with high quality machine tool buiders from around the world who develop customer driven solutions focused on productivity, accuracy, and surface finish utilizing leading edge technology.

Terms of Use
Privacy Policy
FAQ
Sitemap

CNC MACHINE SERVICE / REPAIR – INCLUDING MACHINES NOT SOLD BY US

CALTEC's talented CNC Service Technicians in our Advanced Engineering Department, have 40+ years experience. CALTEC Machinery doctors are available to support any CNC or manual machine our customers currently own, including machines not purchased through CALTEC Machinery.

Get in Touch

  • Phone:
    (310) 605 5221
  • Fax:
    (310) 605 5210
  • Email: sales@caltecusa.com

  • info@caltecusa.com
  • Address:
    1808 W. Mahalo Place
    Rancho Dominguez, CA 90220