MODEL VL50 WITH FANUC 31i


MITSUI SEIKI High Precision Mold Center Model VL50, with linear motors and drives, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Integrated circuit logic, closed loop, with complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC.

MACHINE SPECIFICATIONS

Travels
X axis longitudinal stroke (head traverse) 400 mm (15.75")
Y axis cross stroke (column traverse) 300 mm (11.8")
Z axis vertical stroke (spindle head) 200 mm (7.9")
Distance from spindle nose to table surface Z axis 100 ~ 300 mm 
(3.9"~ 11.8")
Drive for linear axis
X, Y and Z axes Linear motor
Table
Working surface 500 X 400 mm (19.7 x 15.7")
Max permissible load on table 400 kg (880lbs)
Table surface T-slotted (12 mm width)
Height from floor to table top 800 mm (31.5")
Feed Rate (X, Y and Z axes)
Rapid traverse X, Y and Z axes 40,000 mm/min (1,575ipm)
Cutting feed X, Y and Z axes 0.1 - 40,000 mm/min 
(0.004 ~ 1,575 IPM)
Maximum Acceleration 9.8 m/sec² (1 G)
Cutting feed
X, Y and Z axes 0.1 - 40,000 mm/min
(0.004 ~ 1,575 ipm)
Maximum Acceleration 9.8 m/sec2 (1 G)
Minimum Control Resolution
X, Y and Z axes 0.0001 mm (0.0000039")
Minimum Motion command X, Y and Z axes 0.0001 mm 
(0.0000039")
Minimum Motion command
X, Y and Z axes 0.0001mm (0.0000039")
Position Transducer
X, Y and Z axes Linear scale feedback system 0.1 µm resolution 
(Ultra-precision glass scale)
Spindles
25,000 rpm HSK-40
32,000 rpm HSK-32
50,000 rpm HSK-25
Numerical Control Equipment
CNC Control FANUC 31iM
Electrical Service
Electrical Power Required AC 200/220V, 50/60 HZ (70 KVA)
Airl Service
Air Required 0.4 Mpa 700 NL / min-1 or above (57 psi, 25 CFM) 
Air for Mist Equip. is add.
Machine Dimensions (Standard machine)
Length 3,205 mm (126") + OP panel
   (For shipping) 3,510 mm (138")
Width 1,350 mm (53")
   (For shipping) 1,350 mm (53")
Height 2,795 mm (110")
   (For shipping) 2,745 mm (108")
Machine Weight 5,800 kgs (12,760 lbs)
Floor space
Length 3,250 mm (128")
Width 1,550 mm (61") (to anchor = 1,740 mm)

 

About Caltec

Since 1985, CALTEC has shared a commitment with high quality machine tool buiders from around the world who develop customer driven solutions focused on productivity, accuracy, and surface finish utilizing leading edge technology.

Terms of Use
Privacy Policy
FAQ
Sitemap

CNC MACHINE SERVICE / REPAIR – INCLUDING MACHINES NOT SOLD BY US

CALTEC's talented CNC Service Technicians in our Advanced Engineering Department, have 40+ years experience. CALTEC Machinery doctors are available to support any CNC or manual machine our customers currently own, including machines not purchased through CALTEC Machinery.

Get in Touch

  • Phone:
    (310) 605 5221
  • Fax:
    (310) 605 5210
  • Email: sales@caltecusa.com

  • info@caltecusa.com
  • Address:
    1808 W. Mahalo Place
    Rancho Dominguez, CA 90220