MODEL VL30 WITH FANUC 31i


VL30

MITSUI SEIKI High Precision Center Model VL30, with linear motors and drives, numerically controlled with standard equipment including Automatic Tool Changer and high production capability for drilling, boring, tapping & reaming. Integrated circuit logic, closed loop, with complete electrical equipment for operation on 3-phases 50/60Hz, 200/220 Volts AC.

MACHINE SPECIFICATIONS

Travels
X axis longitudinal stroke (head traverse) 200 mm (7.9")
Y axis cross stroke (column traverse) 300 mm (11.8")
Z axis vertical stroke (spindle head) 200 mm (7.9")
Distance from spindle nose to table surface Z axis 100 ~ 300 mm 
(3.9"~ 11.8")
Drive for linear axis
X and Y axes Linear motor
Z axis Linear motor
Table
Working surface 300x400mm (11.8 x 15.7")
Max permissible load on table 200kg (440lbs)
Table surface T-slotted (12mm width)
Height from floor to table top 800mm (31.5")
Feed Rate (X, Y and Z axes)
Rapid traverse
X and Y axis 40,000 mm/min (1,575ipm)
Z axis 40,000 mm/min (1,575ipm)
Cutting feed
X, Y and Z axes 0.1 - 40,000 mm/min (0.004 ~ 1,575 ipm)
Maximum Acceleration 9.8 m/sec2 (1 G)
Minimum Control Resolution
X, Y and Z axes 0.0001mm (0.0000039")
Minimum Motion command
X, Y and Z axes 0.0001mm (0.0000039")
Position Transducer
Linear scale feedback system
X, Y & Z Axes Precision glass scales
Power Required
Electrical Service required AC 200/220V, 50/60HZ (70 KVA)
Air Required
Air Service Required 0.4Mpa 700 NL/min-1 or above
(57 psi, 25 cfm)
Air for Mist Equip. is add.
Machine Dimensions (Standard machine)
Length (For shipping) 3,205 mm(126")
    with Operator's Panel 3,510mm (138")
Width (For shipping) 1,350 mm (53") 1,350mm (53")
Height (For shipping) 2,795 mm (110") 2,745mm(108")
Machine Weight 5,800kgs (12,760 lbs)
Floor space
Length 3,250mm (128")
Width 1,350mm (53") (to anchor = 1,540mm)
Numerical Control Equipment
CNC Control FANUC 31i

About Caltec

Since 1985, CALTEC has shared a commitment with high quality machine tool buiders from around the world who develop customer driven solutions focused on productivity, accuracy, and surface finish utilizing leading edge technology.

Terms of Use
Privacy Policy
FAQ
Sitemap

CNC MACHINE SERVICE / REPAIR – INCLUDING MACHINES NOT SOLD BY US

CALTEC's talented CNC Service Technicians in our Advanced Engineering Department, have 40+ years experience. CALTEC Machinery doctors are available to support any CNC or manual machine our customers currently own, including machines not purchased through CALTEC Machinery.

Get in Touch

  • Phone:
    (310) 605 5221
  • Fax:
    (310) 605 5210
  • Email: sales@caltecusa.com

  • info@caltecusa.com
  • Address:
    1808 W. Mahalo Place
    Rancho Dominguez, CA 90220